Top Five Wifi password finder Android Apps 2018
Top five android apps for wifi access
The Five apps from which you can connect any wifi without password .These are very simple in use . they are in GUI mood .It is illegal to find any others wifi so, use it only for testing purpose. the five
Android apps are given bellow with their description and download link.
1.WPA WPS TESTER
**Devices WITHOUT root permissions and with Android < 5.0 (Lollipop), CANNOT connect with this app and they CANNOT view the WEP-WPA-WPA2**
Do you want to know if your Access Point is vulnerable at the WPS protocol?
Wifi Wps Wpa Tester is the app that you need!
With this app, you can test the connection to AP with WPS PIN.
PINs are calculated with many algorithms:
-Zhao
-TrendNet
-Dlink
-Dlink+1
-Belkin(root)
-FTE-xxx
-TrendNet
-Asus
-AiroconRealtek
-EasyBox Arcadyan
-Arris
And others default PIN of MANY Access Point.
Then NOT ALL AP ARE COMPATIBLE WITH THIS APP.
App allows to do PINS BRUTEFORCE in a SMART WAY ( ONLY FOR ROOTED DEVICES )
Why SMART?
Because, app will try 11000 PINs COMBINATIONS rather than 10^8.
In fact, AP tells to your device if the first 4 of 8 digits of WPS PIN, are correct and the last digit is a checksum of previous 7 digits.
NO OTHERS APP ( CLONE OF THIS APP ) CAN DO THIS.
And, app allows to notify if WPS is in LOCK STATE ( ROOT AND NO ROOT ).
NO OTHERS APP ( CLONE OF THIS APP ) CAN DO THIS.
WPS Lock state is a state when Access Point, for security reasons, does not allow no more PINs. THEN is USELESS to try others PINs.
App needs root permissions for devices with Android version < 5.0 ( LOLLIPOP ).
For devices with Android >= 5.0 you can test the PINs with this app and you can connect, BUT YOU CANNOT SEE WPA ( OR WEP ) PASSWORD WITHOUT ROOT PERMISSIONS.
2. WPS Connect
With this app you'll can connect to WiFi networks which have WPS protocol enabled. This feature was only available in version 4.1.2 of Android.
App developed with educational purposes. I am not responsible for any misuse.
Released under license CC BY-NC-ND 4.0: https://creativecommons.org/licenses/by-nc-nd/4.0/
WPS: http://es.wikipedia.org/wiki/Wi-Fi_Protected_Setup
WPS Connect is focused on verifying if your router is vulnerable to a default PIN. Many routers that companies install own vulnerabilities in this aspect. With this application you can check if your router is vulnerable or not and act accordingly.
Includes default PINs, as well as algorithms such Zhao Chesung (ComputePIN) or Stefan Viehböck (easyboxPIN).
Tested on:
- LG G2
- Nexus 5
- Samsung Galaxy S3
3.Androdummper
Andro Dumpper will try to connect to WPS enabled Wifi Routers that have the WPS vulnerability
using some algorithms to connect to the Wifi.
Hacking anything is forbidden in all religions -
And this application has been developed for totally Testing and Educational purposes only , im not responsible for any bad usage or hacking other Routers that you don't have the right to access
***ROOT is NOT totally required****
**** Location Permission is required for Wifi Network Scanning By Android*****
The application has two methods to connect:
- Root Method : Supported all android version but should be rooted.
- No Root Method : supports only Android 5 (Lollipop) and up.
For Android 5 (Lollipop) and up:
- If you are not rooted you can use the application to connect, but you cannot show password unless you are rooted.
- If you are rooted will be alerted to choose either Root Method or No Root Method. , you can show the password using both methods
For Android 4.4 and earlier:
- You have to be ROOTED for both connecting and showing password
- If Your are not Rooted , then you cannot use the application
================================================
- (Only Rooted Users ) You can show passwords for your current saved networks , just go to Menu then choose ( Saved Networks)
if you already know the WPS PIN you can use the app to connect and get the password using your PIN
Note: Please Before posting bad review ,, be informed that this may fail with some Access Points since these Access Points may not be affected by the WPS bug, so its not the Application fault.
Note: Trying the application on your network or any already connected network will be useless , the application will success always with already connected or saved network, even if your network is not effected by the WPS bug
using some algorithms to connect to the Wifi.
Hacking anything is forbidden in all religions -
And this application has been developed for totally Testing and Educational purposes only , im not responsible for any bad usage or hacking other Routers that you don't have the right to access
***ROOT is NOT totally required****
**** Location Permission is required for Wifi Network Scanning By Android*****
The application has two methods to connect:
- Root Method : Supported all android version but should be rooted.
- No Root Method : supports only Android 5 (Lollipop) and up.
For Android 5 (Lollipop) and up:
- If you are not rooted you can use the application to connect, but you cannot show password unless you are rooted.
- If you are rooted will be alerted to choose either Root Method or No Root Method. , you can show the password using both methods
For Android 4.4 and earlier:
- You have to be ROOTED for both connecting and showing password
- If Your are not Rooted , then you cannot use the application
================================================
- (Only Rooted Users ) You can show passwords for your current saved networks , just go to Menu then choose ( Saved Networks)
if you already know the WPS PIN you can use the app to connect and get the password using your PIN
Note: Please Before posting bad review ,, be informed that this may fail with some Access Points since these Access Points may not be affected by the WPS bug, so its not the Application fault.
Note: Trying the application on your network or any already connected network will be useless , the application will success always with already connected or saved network, even if your network is not effected by the WPS bug
3.WIBR
WIBR+ WIfi BRuteforce without root, is a high-level application for testing WPA / WPA2 PSK WiFi network security.
The Application will try to connect to WPS enabled Wifi Routers that have the WPS vulnerability using some algorithms to connect to the Wifi.The protocol BRuteforce allows you to connect to a WiFi network using an 8-digit pin number that usually is predefined in the router, the problem is that the pin of many routers from different companies is known or is known how to calculate it.
This app supports two types of Testing:
1. Dictionary Testing: WIBR + tries one-by-one in a predefined list of passwords, and if it can not find a password, it simply means that it is not in the dictionary.
2. Violent Testing - You can select the alphabet, the length of the password, and the application will attempt to combine all the characters in the alphabet.
WIBR+ WIfi How to use BRuteforce:
1) Select the network you want, and WIBR+ will automatically test on a WPA / WPA2 network with pre-shared key (PSK).
2) Select the required dictionary or set bruteforce test.
3) the first two points if you have set up, then please be patient, the results should be tested so wait for the results of some long wait patiently waiting for WiFi during the test has been enabled to ensure smooth.
4) WIBR plus WIfi BRuteforce automatically return the result of testing.
Notice: ROOT is NOT totally required & Location Permission is required for Wibr Wifi Network Scanning
Please understand how the application works before giving an assessment.
WiFi Auto Connect
This application helps Wi-Fi auto-connect settings.
Instructions are available at developer's site.- Supported Wi-Fi -
docomo Wi-Fi
Wi2 300
BB mobilepoint
UQ Wi-Fi
7SPOT
LAWSON Free Wi-Fi
Famima Wi-Fi
Tokyo Metro Free Wi-Fi
Toei Subway Free Wi-Fi
Toei Bus Free Wi-Fi
JR East Free Wi-Fi
STARBUCKS Wi-Fi
NTT-EAST FLETS SPOT
source- play store
SHARE
0 Komentar
Post a Comment